Änderungen an Schritt Nr. 4
Bearbeitet von iRobot -
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| [* black] Use the transparent orange loop to disconnect the hard drive ribbon cable from the hard drive. |
| [* icon_note] This is a bit tricky. Try rocking the cable gently from side to side while applying even pressure. If you bend the pins, do your best to straighten them, using the hard drive cable as a guide. |
Bild 1
Kein vorheriges Bild
Hinzugefügt