Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 1

Bearbeitet von Dylan Kratochvil

Bearbeitung genehmigt von Dylan Kratochvil

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] If both memory slots are full you will first need to remove one ofPress out the existing memory cards.
[* red] There are
two latchestabs on either endside of the memory card. In order to remove the card you will need to press out these latches at the same time. After disengaging the latches, pull the
[* black] The memory
card out of its slotwill slide upwards at a 20 degree angle.
[* black] If both memory slots are full you will first need to remove one ofPress out the existing memory cards.
[* red] There are
two latchestabs on either endside of the memory card. In order to remove the card you will need to press out these latches at the same time. After disengaging the latches, pull the
[* black] The memory
card out of its slotwill slide upwards at a 20 degree angle.

Bild 1

Alte Version

Neue Version

Bild 2

Alte Version

Neue Version