Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 4

Bearbeitet von Ivan Viales -

Bearbeitung genehmigt von Ivan Viales

Vorher
Nachher
Unverändert

Schritt-Zeilen

+[title] Pulling the PCB out
+[* black] For repairs such as battery replacement you only need to remove the PCB from the top component
+[* black] This PCB is held on by two plastic tabs. Which are marked in red.
+ [* black] In the second image you can see how the upper case looks after removing the PCB
+ [* black] In order to remove the PCB you will need to use your fingers to push the case from the inside outside. And another finger to push from the top
+ [* black] The PCB will come out one side first. Place your Halberd Spudger on the lifted side to keep in there
+ [* black] Then with the Spudger tip push the rest out

Bild 1

Kein vorheriges Bild

Hinzugefügt

Bild 2

Kein vorheriges Bild

Hinzugefügt

Bild 3

Kein vorheriges Bild

Hinzugefügt