Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 4

Bearbeitet von Ivan Viales -

Bearbeitung genehmigt von Ivan Viales

Vorher
Nachher
Unverändert

Schritt-Zeilen

[title] Pulling the PCB out
[* black] For repairs such as battery replacement you only need to remove the PCB from the top component
[* black] This PCB is held on by two plastic tabs. Which are marked in red.
[* black] In the second image you can see how the upper case looks after removing the PCB
[* black] In order to remove the PCB you will need to use your fingers to push the case from the inside outside. And another finger to push from the top
- [* black] The PCB will come out one side first. Place your Halberd Spudger on the lifted side to keep in there
- [* black] Then with the Spudger tip push the rest out
+ [* black] The PCB will come out one side first. Place your [product|IF145-374|Halberd Spudger] on the lifted side to keep in there
+ [* black] Then with the [product|IF145-002-4|Spudger] tip push the rest out