Zum Hauptinhalt wechseln

Fix Your Stuff

Right to Repair

Parts & Tools

Änderungen an Schritt Nr. 10

Bearbeitet von Josh Wright

Bearbeitung genehmigt von Josh Wright

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] Unplug the wires connected to the logic board from the Cooling Fan
[* black] Unscrew the three screws (Boxed In BlueRed)
[* black] Lift out the Fan and the thing its connected toheat sink it is attached to.
[* black] Twist the screw slightly to the left, so that the pointed black plastic point looks like picture 3. It will not come out easily if this is pointed in the opposite direction to where it was before being unscreweddone wrong so check, check then check again.
[* black] Unscrew the three screws (Boxed In BlueRed)
[* black] Lift out the Fan and the thing its connected toheat sink it is attached to.
[* black] Twist the screw slightly to the left, so that the pointed black plastic point looks like picture 3. It will not come out easily if this is pointed in the opposite direction to where it was before being unscreweddone wrong so check, check then check again.
[* black] Lift out the processor carefully

Bild 1

Kein vorheriges Bild

Hinzugefügt

Bild 2

Kein vorheriges Bild

Hinzugefügt

Bild 3

Kein vorheriges Bild

Hinzugefügt