Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Werkzeug & Ersatzteile

Änderungen an Schritt Nr. 10

Bearbeitet von Josh Wright

Bearbeitung genehmigt von Josh Wright

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] Unplug the wires connected to the logic board from the Cooling FanFan.
[* black] Unscrew the three screws (Boxed In Red)Red).
[* black] Unplug the wires connected to the logic board from the Cooling FanFan.
[* black] Unscrew the three screws (Boxed In Red)Red).
[* black] Lift out the Fan and the heat sink it is attached to.
[* black] Twist the screw slightly to the left, so that the pointed black plastic point looks like picture 3. It will not come out easily if this is done wrong so check, check then check again.
[* black] Lift out the processor carefullycarefully.
[* black] Lift out the processor carefullycarefully.