Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Store

Änderungen an Schritt Nr. 12

Bearbeitet von Josh Wright -

Bearbeitung genehmigt von Josh Wright

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* black] Use some isopropyll to remove the old Thermal Grease/Compound from the heat sink.
[*
black] Apply A little amount of Thermal Compound to the Copper part of the cooling unit in the same positioning as the lastlast. A miniscule amount, just enough to create a tiny layer.
[* black] Screw in the Cooling unit, screwunit/Heat sink. Screw the 2 bottom screws first then the top asscrew.
[* black] Plug
the top screw requires to be pushed down ontowires from the board before it is able to be screwed inCooling Fan back into the Mother Board.
[* black] There you have it :) Your new Processor is installedinstalled.
[* black] Use some isopropyll to remove the old Thermal Grease/Compound from the heat sink.
[*
black] Apply A little amount of Thermal Compound to the Copper part of the cooling unit in the same positioning as the lastlast. A miniscule amount, just enough to create a tiny layer.
[* black] Screw in the Cooling unit, screwunit/Heat sink. Screw the 2 bottom screws first then the top asscrew.
[* black] Plug
the top screw requires to be pushed down ontowires from the board before it is able to be screwed inCooling Fan back into the Mother Board.
[* black] There you have it :) Your new Processor is installedinstalled.

Bild 1

Kein vorheriges Bild

Hinzugefügt