Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 3

Bearbeitet von AnnaMaria Summer

Bearbeitung genehmigt von AnnaMaria Summer

Vorher
Nachher
Unverändert

Schritt-Zeilen

-[* black] Use the pointy end of the small tool that comes with the Skate Tool and insert it under the bearing (look at the red arrow) to pry (and we mean ***++PRY++***) out one of the bearings.
-[* black] We recommend starting with the bearing on side of the wheel that stays closest to the board and prying in the direction of the green arrow.
+[* red] Use the pointy end of the small tool that comes with the Skate Tool and insert it under the bearing (look at the red arrow) to pry (and we mean ***++PRY++***) out one of the bearings.
+[* green] We recommend starting with the bearing on side of the wheel that stays closest to the board and prying in the direction of the green arrow.