Änderungen an Schritt Nr. 6
Schritt-Zeilen
| [* black] 2. Installation of Front Box | |
| [* black] Place box inside vehicle. It fits through the rear doors. This is a 2 person job. | |
| - | [* icon_caution] Mount front legs on front consoles, tighten loosely ***(2 Bolts M10 x |
| + | [* icon_caution] Mount front legs on front consoles, tighten loosely ***(2 Bolts M10 x 1.5 x35mm 6mm Allen cap, 10mm flat washers)***. Pay attention not to break off the alignment pin, which will be inside the post after mounting. |
| [* icon_note] DO NOT mount the box to the center bracket at this point |