Änderungen an Schritt Nr. 4
Bearbeitet von Samuel Covert –
Bearbeitung genehmigt von Samuel Covert
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| - | [* black] To make sure the new thermostat is not crooked along the wall use a level on top of the plate to see if the base is horizontally straight. While holding the plate straight screw in both screws using a Phillips head screwdriver on the left and right side of the base place till it is fastened against the wall. |
|---|---|
| + | [* black] To make sure the new thermostat is not crooked along the wall use a level on top of the plate to see if the base is horizontally straight. While holding the plate straight screw in both 3/5" X 1" Phillips head screws using a Phillips head screwdriver on the left and right side of the base place till it is fastened against the wall. |