Änderungen an Schritt Nr. 1
Schritt-Zeilen
| + | [title] Disassemble the camera following the guide here on Ifixit |
|---|---|
| + | [* black] If a X20 camera fails to react to the "on switch" and the play button on the back it could be due to a faulty fuse on the main PCB. |
| + | [* black] If you suspect this is the case (likely if nothing else works, even with new / freshly charged batteries) and if you are confident to work on SMD boards follow the disassembly guide for the X20. |
| + | [* black] This will eventually give you access to the main PCB which is fitted to the battery compartment. |
| + | [* black] Remove the whole battery compartment from the camera, and unscrew the PCB from the chassis. It will then look a bit like this. |
Bild 1
Kein vorheriges Bild
Hinzugefügt