Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 4

Bearbeitet von Andres Martinez

Wartet auf Freigabe

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] Flip the drive casing and disconnect the four ribbon cables on the edges of the board.
[* blackyellow] Remove the top screws on the board.
[* red
] Remove the two silver screws on the bottom of the case.
[* icon_note] Note: The longest screw must haveholds a metal tab.
[* blackyellow] Remove the top screws on the board.
[* red
] Remove the two silver screws on the bottom of the case.
[* icon_note] Note: The longest screw must haveholds a metal tab.

Bild 2

Alte Version

Neue Version