Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 4

Bearbeitet von Sterling Hirsh ENGL 149

Wartet auf Freigabe

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] Flip over the drive casingcasing. Use a spudger or your finger to lift the latches and disconnect the four ribbon cables on the edges of the board.
[* black] Flip over the drive casingcasing. Use a spudger or your finger to lift the latches and disconnect the four ribbon cables on the edges of the board.
[* yellow] Using a Phillips #00 screwdriver, remove the top screws on the board.
[* icon_caution] Do not remove the screws marked in blue.
[* red] Remove the two silver screws on the bottom of the case.
[* [* icon_note] Note: The longest screw holds a metal tab.
[* [* icon_note] Note: The longest screw holds a metal tab.

Bild 1

Alte Version

Neue Version

Bild 2

Alte Version

Neue Version