Änderungen an Schritt Nr. 4

Bearbeitet von Andres Martinez -

Wartet auf Freigabe

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] Flip the drive casing and disconnect the four ribbon cables on the edges of the board.
[* yellow] RemoveUsing a Phillips #00 screwdriver, remove the top screws on the board.
[* yellow] RemoveUsing a Phillips #00 screwdriver, remove the top screws on the board.
[* red] Remove the two silver screws on the bottom of the case.
[* icon_note] Note: The longest screw holds a metal tab.