Änderungen an Schritt Nr. 6

Bearbeitet von Andres Martinez -

Wartet auf Freigabe

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] Flip case so that the removed part is facing up.
[* black] Remove screw holding the optical sensor.
[* [* icon_note] Note: Take off tape on the wires to separate optical sensor.
[* black] Remove the four black screws on the edges of the case.
[* icon_reminder] After you take out the screws you don't have to open the case yet.
[* [* icon_note] Note: Take off tape on the wires to separate optical sensor.
[* black] Remove the four black screws on the edges of the case.
[* icon_reminder] After you take out the screws you don't have to open the case yet.