Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 2

Bearbeitet von Henry Johnson -

Bearbeitung genehmigt von Henry Johnson

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] Pull the lobiclogic board out with a pry stick gently from bottom to top at the current orientation.
[* blackred] The marked pinoutsribbon cable will be connected up lifting upunderneath the logiclogic board. A small amount of upward force is required to disconnect them.
[* black] Pull the lobiclogic board out with a pry stick gently from bottom to top at the current orientation.
[* blackred] The marked pinoutsribbon cable will be connected up lifting upunderneath the logiclogic board. A small amount of upward force is required to disconnect them.
[* icon_caution] ''Although some force is required to lift up the board, be careful as to not bend any of the pins on either side.''

Bild 1

Alte Version

Neue Version