Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 2

Bearbeitet von Raymond Caulder -

Bearbeitung genehmigt von Raymond Caulder



[* black] Pull the logic board out with a pry stick gently from bottom to top at the current orientation.
[* red] The ribbon cable will be connected underneath the logic board. A small amount of force is required to disconnect them.
[* icon_caution] ''Although some force is required to lift up the board, be careful as to not bend any of the pins on either side.''
[* black] NOTE: Include more pictures of pulling it up.