Repariere deine Sachen Community Store

Änderungen an Schritt Nr. 6

Bearbeitet von Andre Nguyen –

Bearbeitung genehmigt von Andre Nguyen

Vorher
Nachher
Unverändert

Schritt-Zeilen

-[* black] 1) Cut the end of the damaged wire with a pair of snips.
+[* black] Cut the end of the damaged wire with a pair of snips.
[* icon_caution] CAUTION: Do not cut too far down the wire otherwise you will lose lead wire if you have to start over.
-[* black] 2) Use a pair of wire strippers to remove 1/2 to 3/4 of an inch of the wire casing.
-[* black] 3) Complete this step until all damaged wires are repaired.
+[* black] Use a pair of wire strippers to remove 1/2 to 3/4 of an inch of the wire casing.
+[* black] Complete this step until all damaged wires are repaired.