Repariere deine Sachen Community Store

Änderungen an Schritt Nr. 4

Bearbeitet von Alexander L –

Bearbeitung genehmigt von Ennis

Vorher
Nachher
Unverändert

Schritt-Zeilen

-[title] Applying new thermal paste.
-[* black] Once you removed the old thermal paste its time to apply new one. This model has a hole in the heatsink so it doesnt need thermal paste applyed on the smaller pad.
-[* black] Dont use too much thermal paste, just enough to cover some portion of the pad. If you have a spreader, use it. The thermal paste will apply evenly after you tighten the heatsink.
-[* black] Last, put the heatsink back carefully and tighten the screws in order 1 -> 4 to ensure even pressure. Dont forget to plug in the fan cable.
+[title] Apply new thermal paste.
+[* black] Once you have removed the old thermal paste, it's time to apply the new paste. This model has a hole in the heatsink so it does not need thermal paste applied on the smaller pad.
+[* black] Do not use too much thermal paste, just enough to cover the bigger portion of the pad. If you have a spreader, use it. The thermal paste will apply evenly after you tighten the heatsink.
+[* black] Put the heatsink back carefully and tighten the screws in order 1, 3, 2, 4 to ensure even pressure. Don't forget to plug in the fan cable again.