Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 2

Bearbeitet von Sam Goldheart -

Bearbeitung genehmigt von Sam Goldheart

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] '''Remove the three .050 mm screws from the back of the device.'''
[*
red] Use one hand to hold the device steady. Use the T-4 screwdriver to remove the three .050 mm screws from the back cover. Unscrew the three screws located in the upper right hand corner, the upper left hand corner and the lower left hand corner of the device (as highlighted in the pictures).
[* black] '''Remove the three .050 mm screws from the back of the device.'''
[*
red] Use one hand to hold the device steady. Use the T-4 screwdriver to remove the three .050 mm screws from the back cover. Unscrew the three screws located in the upper right hand corner, the upper left hand corner and the lower left hand corner of the device (as highlighted in the pictures).
[* icon_note] ''Place the screws in a safe place. The screws are extremely small and easy to lose. You will need to use the screws in order to put the device back together again.''

Bild 1

Alte Version

Neue Version

Bild 2

Alte Version

Neue Version