Änderungen an Schritt Nr. 3
Bearbeitet von Justin Ogihara –
Bearbeitung genehmigt von Justin Ogihara
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| - | [* black] Heat the back for a few seconds, using a hairdryer to soften the glue that holds it to the frame. |
|---|---|
| - | [* black] Gently insert a plastic card and opening pick between the glass and frame to create an opening. |
| - | [* black] Then gently slide the pick into the created opening |
| + | [* black] Using a hairdryer, heat up the back of the device to loosen the adhesive. |
| + | [* black] Gently insert a plastic card and opening pick between the glass and frame to create an opening. Carefully separate the rear glass from the rest of the device. |
| [* icon_caution] Be careful because the rear glass is very fragile. Do not overheat. |