Änderungen an Schritt Nr. 2
Bearbeitet von Kaylee Marasco –
Bearbeitung genehmigt von Kaylee Marasco
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| - | [* red] Remove the 3” wing screw on the bottom of the fan. |
|---|---|
| - | [* red] Remove the 3” screws (4) on top of the fan |
| - | [* icon_note] The screw heads are starbit so a starbit screwdriver is required for this process. |
| + | [* red] Remove the 3” wing screw on the bottom of the fan; then, remove the (4) 3" screws on the top of the fan. |
| + | [* icon_note] A Torx screwdriver is required for this process. |