Repariere deine Sachen Community Store

Änderungen an Schritt Nr. 10

Bearbeitet von Kaylee Marasco –

Bearbeitung genehmigt von Kaylee Marasco

Vorher
Nachher
Unverändert

Schritt-Zeilen

-[* black] To stop the new fan blades from vibrating, adjust the screws around the metal bracket and motor shaft tightly. Place the other half of the case and screw it again in place.
-[* icon_reminder] It is important to connect/adjust all parts of the tower fan securely in place to avoid noise.
+[* black] To stop the new fan blades from vibrating, tighten the screws around the metal bracket and motor shaft. Then, place the other half of the tower casing and screw it in place.
+[* icon_note] It is important to connect and adjust all parts of the tower fan securely in place to avoid noise.