Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 5

Bearbeitet von Zachary Traynor

Bearbeitung genehmigt von Zachary Traynor

Vorher
Nachher
Unverändert

Schritt-Zeilen

-[* black] Using a 3 mm Flathead Screwdriver, wedge and pry one section of the keyboard trim.
+[* black] Using a Spudger wedge and pry one section of the keyboard trim.
[* black] Gently lift the trim with your finger until multiple tabs of the keyboard trim are unclipped. Go around the trim and unclip all tabs one by one.
[* icon_note] You will hear multiple snaps, but don't worry, this is normal. Multiple tabs may unclip at once.