Repariere deine Sachen Community Store

Änderungen an Schritt Nr. 2

Bearbeitet von Jeanette Lopez –

Bearbeitung genehmigt von Jeanette Lopez

Vorher
Nachher
Unverändert

Schritt-Zeilen

-[* red] Use a Phillips #1 screwdriver to remove the twelve 6-mm screws that borders the bottom of the laptop.
- [* icon_note] Start with the three screws on the top right corner and work clockwise. This will minimize the chances missing some of the screws.
-[* orange] Use a Phillips #1 screwdriver to remove a 6-mm screw that is located in the lower middle, as shown.
-[* yellow] Use a Phillips #1 screwdriver to remove the three 3-mm screws located in the battery bay.
-[* green] Use a Phillips #1 screwdriver to remove the one 4-mm screw located near the RAM.
+[* black] Using a Phillips #1 screwdriver:
+[* red] Remove the twelve 6-mm screws that border the bottom of the laptop.
+[* orange] Remove the 6-mm screw located in the lower middle of the device.
+[* yellow] Remove the three 3-mm screws located in the battery bay.
+[* green] Remove the one 4-mm screw located near the RAM.