Änderungen an Schritt Nr. 4
Schritt-Zeilen
| [* red] Using a Phillips #1 screwdriver, remove the five 6-mm screws in the keyboard slot. | |
| - | [* icon_note] These are not captive screws and once loosened will be free to move about the assembly. Care should be take to not allow either fastener into the CPU fan and duct (located upper left). |
| + | [* icon_note] These are not captive panel screws and once loosened will be free to move about the assembly. Care should be take to not allow either fastener into the CPU fan and duct (located upper left). |