Änderungen an Schritt Nr. 4
Bearbeitet von Jeanette Lopez –
Bearbeitung genehmigt von Jeanette Lopez
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| - | [* red] Use a Phillips #1 screwdriver to remove the five 6-mm screws in the keyboard slot. |
|---|---|
| + | [* icon_caution] CAUTION: do not allow hardware or debris into the CPU fan and duct. |
| + | [* red] Use a Phillips #1 screwdriver to remove the five 6-mm screws in the keyboard slot. |
| [* icon_note] These are not captive panel screws and, once loosened, will be free to move about the assembly. | |
| - | [* icon_caution] Be careful not to allow loosened fasteners into the CPU fan and duct (located in the upper left). |