Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 6

Bearbeitet von gyorpb -

Wartet auf Freigabe

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] The Graphics Card
[* black] The Cube came standard with a Mac ATI Rage 128 Pro 16MB AGP Card.
[* black] there
ATI Radeon (32MB) and nVidia GeForce 2MX (32MB) cards were BTO options.
[* icon_note] There
are few cubeCube compatible mac cards, due to the cube's small size, here are a few compatible cards: ATI Rage 128 Pro (Mac Edition) 16MB AGP, NVIDIA GeForce 2 MX 32MB AGP(Mac Edition)
[* black] The Cube Graphics card is hard to remove, follow these steps
heat dissipation limitations, and limited power supply capabilities.
[* black] The Cube came standard with a Mac ATI Rage 128 Pro 16MB AGP Card.
[* black] there
ATI Radeon (32MB) and nVidia GeForce 2MX (32MB) cards were BTO options.
[* icon_note] There
are few cubeCube compatible mac cards, due to the cube's small size, here are a few compatible cards: ATI Rage 128 Pro (Mac Edition) 16MB AGP, NVIDIA GeForce 2 MX 32MB AGP(Mac Edition)
[* black] The Cube Graphics card is hard to remove, follow these steps
heat dissipation limitations, and limited power supply capabilities.
[* red] Remove these T10 screws:
[* black] Then, pull the top piece of metal off of the computer,
[* icon_caution] There is a small fragile cable coming from the top if the cube for the power button/LED, before fully removing the piece, unplug this cable from the logic board.