Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 11

Bearbeitet von Grizz -

Bearbeitung genehmigt von Jake Devincenzi

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] Removing the Voltage Regulator Module.
[* black] This board is called the DC/DC board or the Voltage Regulator Module. It takes the power from the power brick and regulates the power to different components of the Cube.
[* red] First disconnect this connector, this provides power to the hard drivedrive.
[* black] Then release the white clip on the connector socket, which is accessed from the side of the core.
[* red] First disconnect this connector, this provides power to the hard drivedrive.
[* black] Then release the white clip on the connector socket, which is accessed from the side of the core.
[* black] with a little persuesion, the board comes out of it's socket(it's hard to show how the board comes out, but in person, it's pretty self explanitory)