Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 2

Bearbeitet von Walter Galan -

Wartet auf Freigabe

Vorher
Nachher
Unverändert

Schritt-Zeilen

-[* black] There are three screws you need to remove:
- [* red] One 4.8 mm T8 Torx screw next to bar code sticker.
- [* green] Two 5.8 mm T8 Torx screws holding power supply to logic board.
+[* black] Remove the following three screws securing the power supply to the upper case:
+ [* red] One 4.8 mm T8 Torx screw
+ [* orange] Two 5.8 mm T8 Torx screws

Bild 1

Alte Version

Neue Version