Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 1

Bearbeitet von hketterle -

Wartet auf Freigabe

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* icon_note] The fan is held in place by three rubber posts. These posts can be quite annoying.
[* red] Using tweezers, squeeze the top of each post and push the post down into the hole. Repeat for all three posts.
+[* black] For reinstallation, the rubber posts are even more tricky. It helps to lubricate them, and try using string through the hole in the posts to pull them up through the mounting holes in the fan. Don't pull too hard, or the posts will rip.