Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 1

Bearbeitet von Melissa Pavelka -

Bearbeitung genehmigt von Marty Rippens

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* red] Remove the T8 Torx screw securing the metal shield to the case.
-[* icon_note] In order to remove the T8 screw, you must insert the screwdriver through the access hole in the metal shield, located near the PRAM battery.
+[* icon_note] To remove the T8 screw, you must insert the screwdriver through the access hole in the metal shield. The access hole is located near the PRAM battery.