Änderungen an Schritt Nr. 22
Bearbeitet von Bango Bejla –
Bearbeitung genehmigt von Bango Bejla
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| + | [title] Remove the black design cover |
|---|---|
| + | [* black] Remove the screw next to the battery charging port with a PH1 Screwdriver [marked with red circle] |
| + | [* icon_note] This screw is the smallest of the three types |
| + | [* black] Remove the upper screw with a 3 mm hex key on both sides. (2x in total) [marked with blue circle on this side] |
| + | [* icon_note] These screws are slightly longer and thinner, than the lowest screws |
Bild 1
Kein vorheriges Bild
Hinzugefügt