| - | [* black] Insert wisdom here. |
|---|
| + | [* green] Remove the four (4) Philips screws indicated using a #1 bit. |
|---|
| + | [* icon_caution] The display inverter board is connected at the bottom. Be careful during the next step not to damage the ribon cable. |
|---|
| + | [* violet] Remove the LCD panel from the housing and tilt down toward you, resting the LCD panel on the keyboard. |
|---|
| + | [* orange] Disconnect the display cable from the display by carefully pulling back towards the assembly. (the female end is on the display). |
|---|
| + | [* icon_note] The cable may be secured using tape. Using your hobby knife, gently cut the tape being careful not to damabe the display or connector. Trying to remove this stuff in-tact is next to impossible. |
|---|
| + | [* black] You can now replace the display and re-assemble by using the steps in reverse. |
|---|