Änderungen an Schritt Nr. 6
Bearbeitet von Jack Bjelland –
Bearbeitung genehmigt von Jack Bjelland
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| - | [* black] Finally, clean the heat sink using at least 70% isopropyl alcohol on a wipe or paper towel. |
|---|---|
| - | [* black] To apply thermal paste, place a small dot of paste no larger than a gran of rice on each of the shiny metal pads. (Not pictured). |
| - | [* icon_caution] If you do not replace the thermal paste and your new part does not come with thermal paste pre-applied, you run the risk of overheating and possible damage to your machine. |
| + | [* black] Replace the thermal paste on the processor using the following [guide|744|guide]. |