Repariere deine Sachen Community Shop

Änderungen an Schritt Nr. 7

Bearbeitet von Sarah Westberg –

Bearbeitung genehmigt von Sarah Westberg

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* black] Slide the dust cover on and install the stem.
-[* icon_note] Check the amount of space there is between the top of the steerer tube and the top of your stem. Your steerer tube should lay just a few millimeters below allowing for clamping and compression. If it doesn't, add a spacer on top of the dust cover and under the stem.
+[* icon_note] Check the amount of space between the top of the steerer tube and the top of your stem. Your steerer tube should lay just a few millimeters below, and allow for clamping and compression. If it doesn't, add a spacer on top of the dust cover and under the stem.