Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Store

Änderungen an Schritt Nr. 5

Bearbeitet von Walter Galan -

Wartet auf Freigabe

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* icon_note] When installing a new drive, make sure that the drive jumper block is set to "Single drive" indrive". In most drives, this means removing the jumper, or positioning the jumper horizantalyhorizontally instead of verticlyvertically, so you don't lose it.
[* orange] To remove the drive from the metal caddy, remove these 4four screws from the side of the drive.
[* icon_note] When installing a new drive, make sure that the drive jumper block is set to "Single drive" indrive". In most drives, this means removing the jumper, or positioning the jumper horizantalyhorizontally instead of verticlyvertically, so you don't lose it.
[* orange] To remove the drive from the metal caddy, remove these 4four screws from the side of the drive.