Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 3

Bearbeitet von Darren Chan -

Wartet auf Freigabe

Vorher
Nachher
Unverändert

Schritt-Zeilen

-[* icon_caution] Be careful not to bend the pins between the mounted headers when you remove the power supply from the chassis.
+[* yellow] Be careful not to bend the pins between the mounted headers when you remove the power supply from the chassis. These ***Power Prongs*** transfer power to the logic board below. If these prongs are bent or dirty, clean them and gently bend them vertical again. Simple maintenance will help keep your Dreamcast running smoothly.
[* black] Using both hands, gently lift the power board away from the console.
-[* black] These ***Power Prongs*** are where the power is transferred to logic board below, then the rest of the unit. IF these prongs are bent or dirty, clean them and gently bend them vertical again. Simple maintenance will help keep your Dreamcast running smoothly.
+[* black] These ***Power Prongs*** transfer power to the logic board below. If these prongs are bent or dirty, clean them and gently bend them vertical again. Simple maintenance will help keep your Dreamcast running smoothly.