Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 3

Bearbeitet von Jacks216 -

Wartet auf Freigabe

Vorher
Nachher
Unverändert

Schritt-Zeilen

-[* yellow] Be careful not to bend the pins between the mounted headers when you remove the power supply from the chassis. These ***Power Prongs*** transfer power to the logic board below. If these prongs are bent or dirty, clean them and gently bend them vertical again. Simple maintenance will help keep your Dreamcast running smoothly.
+[* yellow] Be careful not to bend the pins between the mounted headers when you remove the power supply from the chassis. These ***Power Prongs*** transfer power to the logic board below. If these prongs are bent or dirty, clean them and gently bend them vertical again to help establish a good connection. Simple maintenance will help keep your Dreamcast running smoothly.
[* black] Using both hands, gently lift the power board away from the console.
-[* black] These ***Power Prongs*** transfer power to the logic board below. If these prongs are bent or dirty, clean them and gently bend them vertical again. Simple maintenance will help keep your Dreamcast running smoothly.