Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 3

Bearbeitet von Darren Chan -

Wartet auf Freigabe

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* yellow] Be careful not to bend the pins between the mounted headers when you remove the power supply from the chassis. These ***Power Prongs*** transfer power to the logic board below. If these prongs are bent or dirty, clean them and gently bend them vertical again to help establish a good connection. Simple maintenance will help keep your Dreamcast running smoothly.
-[* black] Using both hands, gently lift the power board away from the console.
+[* black] ***Remove the power board.*** Using both hands, gently lift the power board away from the console.