Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 3

Bearbeitet von wkwong -

Wartet auf Freigabe

Vorher
Nachher
Unverändert

Schritt-Zeilen

-[* yellow] ***Do not bend the pins*** between the mounted headers when you remove the power supply from the chassis.
-[* icon_note] These power prongs transfer power to the logic board below. If these prongs are bent or dirty, clean them and gently bend them vertical again to help establish a good connection. Simple maintenance will help keep your Dreamcast running smoothly.
+[* yellow] ***Do not bend the male pin head*** between the mounted head when you remove the power supply from the chassis.
[* black] ***Remove the power board.*** Using both hands, gently lift the power board away from the console.