Änderungen an Schritt Nr. 2
Bearbeitet von Clay Eickemeyer –
Bearbeitung genehmigt von Clay Eickemeyer
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| + | [title] Unfasten the heatsink |
|---|---|
| + | [* red] Use your Phillips screwdriver to remove the two 4.7 mm screws securing the top left and bottom left edges of the heatsink. |
| + | [* orange] Use your Phillips screwdriver to fully loosen the eight captive screws securing the center of the heatsink. |
| + | [* icon_note] These screws aren't designed to come out. However, if one does come out, set it and its spring aside. |
Bild 1
Kein vorheriges Bild
Hinzugefügt
Bild 2
Kein vorheriges Bild
Hinzugefügt