Änderungen an Schritt Nr. 2
Bearbeitet von suhanipatel –
Bearbeitung genehmigt von suhanipatel
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| - | [* red] Using a Phillips screwdriver, remove the two 2 mm screws holding the filter in place. |
|---|---|
| + | [* red] Find the two small screws that are holding the filter in place, as shown in the picture. |
| + | [* black] Next, use a Phillips-head screwdriver that will properly fit into the screws. Gently unscrew the screws ( 2 mm ). Once unscrewed, make sure to keep the screws in a safe place where they won’t get lost. |
| + | [* black] After, the screws are in a safe place, carefully pull the filter out of its place. Be careful when taking out the filter so that it doesn’t get damaged. |