HP ENVY x360 - 15-cn0003ca CPU Fan Replacement Schritt Nr.7 Verlauf - iFixit

Änderungen an Schritt Nr. 7

Bearbeitet von Luka Petrovic – 24. Sep 2023

Bearbeitung genehmigt von Luka Petrovic

: Vorher
: Nachher
: Unverändert

Schritt-Zeilen

	[* black] *Reassemble the Laptop:*
-	[* ~~black~~] *Position the Bottom Panel:* Carefully position the laptop's bottom panel (the cover you removed earlier) back in place over the internal components. Ensure that it aligns correctly with the laptop's chassis. It should fit well without any gaps or misalignment.
-	[* ~~black~~] *Secure it with Screws:* Using the screws you removed earlier to detach the bottom panel, start screwing them back into their respective holes. Work methodically and systematically, starting with one corner and gradually moving around the edges. This ensures even and secure attachment.
-	[* ~~black~~] Don't overtighten the screws; simply tighten them until they are snug. Overtightening can damage the threads or the laptop's casing.
-	[* ~~black~~] *Check for Proper Alignment:* After all the screws are securely in place, double-check the alignment of the bottom panel. Make sure there are no bulges or parts that are not fitting correctly. Gently press down on different areas of the bottom panel to ensure it is firmly seated and properly attached.
+	[* red] *Position the Bottom Panel:* Carefully position the laptop's bottom panel (the cover you removed earlier) back in place over the internal components. Ensure that it aligns correctly with the laptop's chassis. It should fit well without any gaps or misalignment.
+	[* orange] *Secure it with Screws:* Using the screws you removed earlier to detach the bottom panel, start screwing them back into their respective holes. Work methodically and systematically, starting with one corner and gradually moving around the edges. This ensures even and secure attachment.
+	[* icon_note] Don't overtighten the screws; simply tighten them until they are snug. Overtightening can damage the threads or the laptop's casing.
+	[* yellow] *Check for Proper Alignment:* After all the screws are securely in place, double-check the alignment of the bottom panel. Make sure there are no bulges or parts that are not fitting correctly. Gently press down on different areas of the bottom panel to ensure it is firmly seated and properly attached.