Änderungen an Schritt Nr. 13
Bearbeitet von Spencer Day –
Bearbeitung genehmigt von Spencer Day
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| - | [title] |
|---|---|
| + | [title] Strengthen the adhesive bond |
| [* icon_note] This step shows how to further strengthen the bond of your new screen adhesive. | |
| - | [* icon_note] In order to get even pressure around the perimeter of the screen, you'll need to account for the camera |
| + | [* icon_note] In order to get even pressure around the perimeter of the screen, you'll need to account for the [link|https://guide-images.cdn.ifixit.com/igi/JeQhUZZukO1E5YCw.full|rear camera bump|new_window=true] by placing objects on the rear cover. |
| [* black] If you have screen vice clamps, [guide|142291|use them|new_window=true] to work around the camera bar. | |
| [* black] Lay your phone screen side down on a clean, flat surface. | |
| [* black] Put tape around the perimeter of your phone to protect the rear cover. | |
| - | [* black] Place coins or similarly thick objects around the perimeter of the back cover. Make sure they're [link|https://guide-images.cdn.ifixit.com/igi/cPMFl6V5UHUiINAL.full|as thick or thicker than the camera |
| + | [* black] Place coins or similarly thick objects around the perimeter of the back cover. Make sure they're [link|https://guide-images.cdn.ifixit.com/igi/cPMFl6V5UHUiINAL.full|as thick or thicker than the camera bump|new_window=true]. |
| [* black] Place heavy objects such as books on your phone and leave them for 30 minutes or longer. Ideally, leave them stacked overnight. |