Änderungen an Schritt Nr. 4
Bearbeitet von Josiah Collmer –
Bearbeitung genehmigt von Josiah Collmer
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| [* black] Using the iFixit plastic opening tool, wedge it into the seam of the bottom plate. This will create a small gap between the sections that you can gently pry open. Work your way around to each side of the device until the bottom pops free. | |
| - | [* |
| + | [* icon_caution] Caution: DO NOT attempt to fully remove the bottom plate yet, as there are still connected wires. Doing so may result in damage to your device. |