Änderungen an Schritt Nr. 5
Bearbeitet von David Kamp –
Bearbeitung genehmigt von David Kamp
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| [* black] Unscrew the nut holding the fan in place and remove all hardware from the threaded shaft | |
| - | [* icon_note] There should be a nylon-insert lock nut, a flat washer, and a split ring washer |
| + | [* icon_reminder] There should be a nylon-insert lock nut, a flat washer and a split ring washer. Set these aside in a safe location. |
| + | [* icon_note] Use a 13mm socket wrench to do this, with an extension to reach the nut if necessary |