Änderungen an Schritt Nr. 14
Bearbeitet von David Kamp –
Bearbeitung genehmigt von David Kamp
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| - | [* black] Unscrew the nut holding the fan in place and remove all hardware from the threaded shaft |
|---|---|
| + | [* black] Unscrew the nut holding the fan in place and remove all hardware from the threaded shaft. |
| [* icon_reminder] There should be a nylon-insert lock nut, a flat washer and a split ring washer. Set these aside in a safe location. | |
| - | [* icon_note] Use a 13mm socket wrench to do this, with an extension to reach the nut if necessary |
| + | [* icon_note] Use a 13mm socket wrench to do this, with an extension to reach the nut if necessary. |