Änderungen an Schritt Nr. 1
Bearbeitet von David Kamp –
Bearbeitung genehmigt von David Kamp
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| - | [* black] Insert your jimmy tool between the gray top cover and the white outer cover |
|---|---|
| - | [* black] Pop the tabs holding the cover in place and remove it |
| - | [* icon_reminder] Take note of the placement of the tabs, as they are keyed and need to go back in the exact way they came out |
| - | [* icon_caution] Be careful not to put too much strain on the ribbon cable as it may break |
| - | [* icon_caution] Make sure the device is turned off and unplugged before disassembling it |
| + | [* black] Insert your jimmy tool between the gray top cover and the white outer cover. |
| + | [* black] Pop the tabs holding the cover in place and remove it. |
| + | [* icon_reminder] Take note of the placement of the tabs, as they are keyed and need to go back in the exact way they came out. |
| + | [* icon_caution] Be careful not to put too much strain on the ribbon cable as it may break. |
| + | [* icon_caution] Make sure the device is turned off and unplugged before disassembling it. |