Änderungen an Schritt Nr. 1
Bearbeitet von Sarah Westberg –
Bearbeitung genehmigt von Sarah Westberg
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| - | [* black] Insert your jimmy tool between the gray top cover and the white outer cover. |
|---|---|
| - | [* black] Pop the tabs holding the cover in place and remove it. |
| - | [* icon_reminder] Take note of the placement of the tabs, as they are keyed and need to go back in the exact way they came out. |
| + | [* icon_caution] Make sure the device is turned off and unplugged before disassembling it. |
| + | [* black] Insert the Jimmy between the gray grille cover and the top of the device. |
| + | [* black] Work your way around the grille cover with the Jimmy to release the clips holding it in place. |
| + | [* icon_reminder] Take note of the placement of the clips, as they are keyed and need to go back in the exact way they came out. |
| + | [* black] Remove the grille cover gently as it is connected by a ribbon cable. |
| [* icon_caution] Be careful not to put too much strain on the ribbon cable as it may break. | |
| - | [* icon_caution] Make sure the device is turned off and unplugged before disassembling it. |